Sunday, 24 January 2021

How to fix Error code: 0x80070035. The network path was not found, step by step

How to fix Error code: 0x80070035. The network path was not found, step by step

How to fix Error code: 0x80070035. The network path was not found, step by step

Hello guys if you are facing same problem in your pc 
I have tried to solve this problem in this article 

Step 1: Make sure you share your drivers


1) Right-click on the service you are viewing and select Properties.  Driver C is used in medical devices as an example.

 2) Go to the "Share" tab.  If you find that the network path is not shared here, click the Advanced Sharing tab.

3) Check the box to share this folder, and then make sure the partition name is correct.  Then click "Apply" and "OK" to save and extract the changes.

4) Then press the Windows and R keys at the same time to open the Run command.  Enter a folder name in the search box and press Enter.  You will have access to this directory.

Step 2: Use the target computer's IP address


1) On the target computer, press Windows and R at the same time, then press cm.

2) Enter the following command into the command prompt immediately:

3) Then scroll down a bit to find the IPv4 address range.  Check out the address below (192.168.43.157).

4) Then press Windows key again and press R together.  In the search box, enter the address \\ IPv4 \ driver that you want to access.  Then press Enter.  We use \\ 192.168.43.157 \ c as an example.

5) You can see that port C was properly opened.

Step 3: Change your network security settings


If the two methods above didn't help, check if there is a problem with your network connection.

1) Press the start button, then type secpol.msc in the search box and press Enter.

2) Then follow the path: Local Policy> Security Options> Network Security: LAN Manager Authentication Level.  Double-click Network Security: LAN Manager certification option.

3) Then select LM and NTLM from the NTLMv2 security session to use as a negotiable drop-down list.  Then select "Apply" and "OK" to save changes.

4) Try one now.

Step 4: Reset TCP / IP Reset


1) Right click on the network connection icon in the lower right corner and select Open Network and Sharing Center.

2) On the left side of the control panel, change the adapter settings.

3) Right click on your network adapter and select Properties.  If you are using WiFi connection enter the network adapter and keep an eye on it.

4) Click the Install ... button.

5) Select Tutorials and click Add.

6) Select the reliable multicast process mentioned here, then click OK to install the process.

 

I hope you found this article helpful.  If you have any questions, suggestions or suggestions, feel free to leave a comment below.